5.FTDSW.jpg

3D Printing resins, filaments and materials

Lumi Industries sells LumiReact 3D printing resins, Fep film, post processing products and filaments. Official Italian distributor of Fun To Do 3D printing resins .

Harz Labs ART Glow 3D Printing Resin

Harz Labs ART Glow 3D Printing Resin

from €74.38

3D printing resin designed for “glow in the dark” models.

Size:
Quantity:
Add to Cart

3D Printing resin Harz Labs Model for Glowing 3D models.

Art_glow.png


Harz Labs ART Glow resins are designed for printing of decorative products.

A feature of this polymer is the use of a special glowing pigment, which ensures a bright green glow in the dark for up to 2 hours.


Product without european certification, to be used only for models.

COMPATIBLE WITH MAIN DLP/LCD 3D PRINTERS

Find here more information about 3D printing settings.

 
Halloween Banner.jpg
Art_glow_harzlabs.gif

3D printing resin Harz Labs ART Glow

 Package                 1kg/0.5kg
 Applications    Glowing 3D models
 Color    opaque yellow
 Hardness (Shore D)    90-92
 Luminescence    up to 2 h
 Shrinkage    <0.5%

Advantages

  • GLOW IN THE DARK

    Art Glow Resin keeps a luminescence up to 2 hours after fully “charging”.

  • SAFE

    Resin does not contain solvents, volatile monomers or irritating compounds. No fumes, odor and allergic reaction.

  • LOW SHRINKAGE

    Shrinkage less than 0,5 % gives you the same size like 3D model on your computer.

  • ODORLESS

    Resins are odorless and cause no irritation, so you can work with natural ventilation.

  • LOW VISCOSITY

    The resin has relatively low viscosity. It decreases time for levelling, easy to clean to provide maximum accuracy at minimum time.

Finishing Instructions

  1. Agitate in a vat with TEK1960* solvent for 1-2 minutes to remove excess resin.

  2. Do not soak in acetone. Do not leave the 3D part soaking in the liquid. Use a soft brush if necessary.

  3. Clean off any excess of liquid with a cold blowdryer or compressed air.

  4. Leave under the sun or in a UV lamp to cure. The resin is fully cured when fingernails do not leave scratch marks on the object.

  5. Even after full post cure some parts may still have a sticky surface. You can treat your print with Ta-Tack Away. A quick wash in this special formula will add a stick-free coating on the printed part.

*We do not recommend the use of denatured or isopropyl alcohol (IPA). It is very aggressive on the polymerized resin and it could weaken the structure of the 3D part. It is also flammable and potentially harmful to people and the environment.

Store the resin in a dry, cool, shaded place out of direct sunlight.

 

Safe notice

The company I.D.M di Marin Davide is not a manufacturer of medical materials or devices. The material sold on this site is neither produced nor controlled by the company I.D.M. di Marin Davide, who in no case can be held responsible for any damage caused by use or application of the material, which must only be used on suitable machines and by specialized personnel, exclusively for the purpose indicated, according to the manufacturer's instructions. For resins with European certification, the properties of the finished product vary according to the entire printing and post-curing process; refer to the manufacturer for any information about it.