LumiReact Hard & Strong 3D Printing Resin

from €82.80

Professional, tough and strong 3D printing resin. 4 colors available.

Color:

Natural Teal Orange Grey

Quantity:

Add to Cart

3D printing resin LumiReact Hard & Strong.

Lumi React Hard & Strong is a line of resin suitable for parts requiring a certain hardness.

These resins allow to enhance details accuracy, have a very low shrinkage value and are working both on DLP or UV laser printers with a spectrum between 225nm to 415nm.

They are water-resistant and once solidified they keep intact their characteristics and forms at temperatures between -40 ° and + 220 °.
Contact us to confirm if they are compatible with your printer.

Available in grey, blue teal, orange and in the NEW NATURAL TONE color.

3D printing resin LumiReact HS characteristics

 Package
 
 1 kg

 Color
 
 opaque: natural. teal, orange, grey

 Viscosity
       at 25°C        
 95 mPa.s

 Density
 
 1.01 g/cm3

 Hardness (Shore D)      
 
 75

msds

Finishing Instructions

To clean and remove excess resin, agitate the 3D printed part in an ultrasonic cleaner with TEK1969 cleaning or in a simple vat with TEK1960 solvent for 1-2 minutes.
Do not soak in acetone. Do not leave the 3D part soaking in the liquid. Use a soft brush if necessary.
Clean off any excess of liquid with a cold blowdryer or compressed air.
Leave under the sun or in a UV lamp to cure. The resin is fully cured when fingernails do not leave scratch marks on the object.
Even after full post cure some parts may still have a sticky surface. You can treat your print with Ta-Tack Away. A quick wash in this special formula will add a stick-free coating on the printed part.

*We do not recommend the use of denatured or isopropyl alcohol (IPA). It is very aggressive on the polymerized resin and it could weaken the structure of the 3D part. It is also flammable and potentially harmful to people and the environment.

Store the resin in a dry, cool, shaded place out of direct sunlight.

LumiReact HS natural