FTD Deep Black 3D Printing resin
FTD Deep Black 3D Printing resin
Fun To Do resin for 3D printers. High resolution and PLA/ABS lookalike finishing.
3D printing resin Fun To Do Deep Black.
Fun To Do Deep Black is a high resolution 3D printing resin.
With only a 0.5 % shrinkage it is a perfect choice for with artistic prints. It has the look and feel of injection moulded plastic. As Fun To Do team state “When we say black, we mean black, deep black, with no discoloration in even the finest detail. Because of the very small, near nano particle pigmentation, ‘Deep Black’ has an ultra-high definition,”
3D printing resin Fun To Do Deep Black characteristics
| Package | 1 kg | |
| Color | black, opaque | |
| Viscosity | at 25°C | 80 mPa.s |
| Hardness (Shore D) | 81 |
Finishing Instructions
To clean and remove excess resin, agitate the 3D printed part in an ulkltrasonic cleaner with TEK1969 cleaning or in a simple vat with TEK1960 solvent* for 1-2 minutes until all excess resins has been removed.
Do not soak in acetone. Do not leave the 3D part soaking in the liquid. Use a soft brush if necessary.
Clean off any excess of liquid with a cold blowdryer or compressed air.
Leave under the sun or in a UV lamp to cure. The resin is fully cured when fingernails do not leave scratch marks on the object.
Even after full post cure some parts may still have a sticky surface. You can treat your print with Ta-Tack Away. A quick wash in this special formula will add a stick-free coating on the printed part.
*We do not recommend the use of denatured or isopropyl alcohol (IPA). It is very aggressive on the polymerized resin and it could weaken the structure of the 3D part. It is also flammable and potentially harmful to people and the environment.
Store the resin in a dry, cool, shaded place out of direct sunlight.
More information is available at FunToDo.
