BlueCast CR3A
BlueCast CR3A
Bluecast CR3A High quality entry level castable resin for 3D printing
Castable 3D printing resin BlueCast Cr3A
Cr3a is one of the easiest castable resins to print and ensure excellent casting.
Consistent casting quality as BlueCast standard
Ash residual 0.00%_ proprietary TGA at 750°C / 4 hrs without contact to air, in closed vessel
Low cost
Negligible shrinkage
No primer needed
Monomer based resin (*)
High resolution
Good strength
Fast printing speed
Very low odor
Very low viscosity, no need to heat
Chromacure® will tell you when postcure is done and pattern is ready to cast
Postcuring treatment require
Differently from other monomer based resin that requires complex and tricky treatments BC Crea just requires to be washed after print and cured in to BC CURING LIQUID we supply. No hot water wash required, no boiling, no overnight curing.
Fully compatible with all LCD printers and with all DLP machines
Cr3a CURING LIQUID is a special liquid for the curing of BC Cr3a resin.
A 250 gr bottle of Cr3a Curing Liquid is recommended for the curing of 2 kg of resin.
3D printing Castable resin Cr3A characteristics
Package | 0.5 kg | |
Color | blue | |